Cobra microTALK CXT545C Manuel Du Propriétaire page 9

Mode Functions
Mode Functions
Operation
Ten Call Tone Settings
You can choose between ten different Call Tone Settings to transmit
a call alert.
To change a call tone setting:
Mode/Power
1. Press the Mode/Power button until the
letter "C" and the current call tone number
(01 through 10) is displayed. The current
call tone will sound for three seconds.
Call Tone Setting
2. Press the Channel Up or Channel Down button
to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
Channel Button
HI / LO
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 6 seconds to return
to Standby mode.
VibrAlert ® and Call Alert
Your MicroTALK
signals by sounding an audible call tone or an
Call Tone On/
Vibrate On
audible tone with VibrAlert
To change call settings:
1. Press the Mode button until the Call Setting
icon flashes on the display. The current setting
("01" vibrate + ring, "02" ring only) is displayed.
Call Tone On/
2. Press the Channel Up or Channel Down button to
Vibrate Off
change the call setting.
3. Choose one of the following:
a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 6 seconds to return
to Standby mode.
12
CXT545C_MANL_ENG_GIANT.indd 12-13
•
•
®
radio can alert you to incoming
®
.
Introduction Operation
Roger Beep Confirmation Tone
Your listener will hear an audible tone when you release the Talk button.
This alerts the other party that you are finished talking and it is OK for
them to speak.
To turn roger beep on or off:
Mode/Power
1. Press the Mode/Power button until the
Roger Beep icon flashes. The current
on or off setting is displayed.
2. Press the Channel Up or Channel Down button
Roger Beep Off
to select roger beep on or off.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call/Lock button to return to
Channel Button Channel Button
HI / LO
Standby mode.
c. Do not press any buttons for 6 seconds to return
to Standby mode.
Key Tone On/Off
When Key Tone is On, an audible tone will sound each time a button
is pressed.
To turn key tone on or off:
Mode/Power
1. Current key tone status On/Off will flash.
2. Press the Channel Up or Channel Down button
to select key tone on or off.
3. Choose one of the following:
Channel Button
HI / LO
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 6 seconds to return
to Standby mode.
Nothing Comes Close to a Cobra
Customer Assistance Warranty
•
•
®
13
3/4/15 1:17 PM