How To Use - Rowenta AQUA EXCEL Mode D'emploi

9. Liquids pipe connection
EN
10. Caster support cradle
11. Stop/start switch
12. Opening for adding product
13. Pump stop/start switch
14. Fastening tabs
15. Shampoo reservoir
16. Tank
17. Wheels
18. Caster
19. Vacuuming adaptor
20. Double function universal brush
21. Vacuuming adaptor
22. Cloth bag (ref. RS-RB8489)
23. Paper bag (ref. ZR816)
24. Accessories for washing windows
25. Upholstery nozzle
26. Crevice tool
27. Little extraction nozzle with connection pipe
28. Water pipe with fastening clips and valve lever
29. Wide extraction nozzle with connection pipe
30. Power nozzle
31. Mechanical vacuum sliding control
32. Flexible hose
33. Vacuuming pipes
34. Motor unit
35. Liquid valve (28)
BEFORE USING YOUR CARPET WASHER FOR THE FIRST TIME
1 • UNPACKING YOUR CARPET WASHER
Unpack your carpet washer, keep your guarantee form and read the instructions carefully before using
your carpet washer for the first time.

HOW TO USE

1 • ASSEMBLING THE PARTS OF THE CARPET WASHER
Fitting the casters.
• Put the vacuuming adaptor in the vacuuming opening and turn it clockwise as far as it will go. (fig.1)
• Assemble the tubes and connect them to the flexible hose.
• Choose the accessory you need. (fig.2)
• Unlock the fastening tabs, remove the motor unit, take out the reservoir and turn the tank over.(fig.3)
• Clip the wheels directly on to the bottom of the tank.
2 • VACUUMING DRY DUST
IMPORTANT The paper bag must only be used for vacuuming dry dust
Fit the bag (fig.4).
• Gently fold the edges of the paper bag.
• Lift the handle so that it is well away from the vacuuming opening. (fig.5)
• Slide and push the card holder for the paper bag or the plate for the cloth bag as far as they will go.
• Plug in the vacuuming adaptor and lock it by turning it. (fig.5)
• Put the motor unit back in place, the stop/start button must be located above the vacuuming opening,
lock the fastening tabs.(fig.6)
• Insert the vacuuming flexible hose in the vacuuming opening.
• Holding the power lead by the plug, pull on it and plug into a power socket. (fig.7)
8