User Controls - NEC LCD1515 Mode D'emploi

Controls

User Controls

3
1. Power Switch: To turn ON or OFF the power
2. Power LED: Lights up to indicate that the monitor power is turned ON
3. MENU: To exit and enter OSD menu
4. : To move downward in the OSD Item
5. – : To decrease the value of the parameter in the OSD, which has been selected for
adjustment
– : Choose the previous OSD MENU page
6. + : To increase the value of the parameter in the OSD, which has been selected for
adjustment
+ : Choose the next OSD MENU page
AUTO: Act as AUTO adjustment hot key when OSD is not displayed
Standard OSD Operation
MENU MENU
1. Press MENU MENU key to activate the OSD menu, when OSD is not displayed. MENU
2. Use Select key to move down through the menu cyclically. The parameter will be
highlighted when selected.
3. Then use ''+ + + + + '' or ''- - - - - '' to increase or decrease the value of the parameter, or make selection
between different options.
4. To quit the OSD screen at any time during the operation, press MENU
are pressed for a time period, the OSD automatically disappears.
5. When OSD is not displayed, press "+ + + + + " key to start Auto-Adjust.
15151715manual042502.p65
–continued
4 5
8
6
2
MENU key. If no keys MENU MENU MENU
8
4/25/03, 12:09 PM
1