Safety Notes; General Power Tool Safety Warnings - Bosch GSR 1000 Notice Originale

Masquer les pouces Voir aussi pour GSR 1000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
All manuals and user guides at all-guides.com
OBJ_BUCH-2423-002.book Page 21 Tuesday, August 11, 2015 9:55 AM
English

Safety Notes

General Power Tool Safety Warnings

Read all safety warnings and all instructions. Failure to follow
WARNING
the warnings and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
Work area safety
 Keep work area clean and well lit. Cluttered or dark areas invite accidents.
 Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
 Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
Electrical safety
 Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
 Avoid body contact with earthed or grounded surfaces, such as pipes, radia-
tors, ranges and refrigerators. There is an increased risk of electric shock if your
body is earthed or grounded.
 Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges and moving parts.
Damaged or entangled cords increase the risk of electric shock.
 When operating a power tool outdoors, use an extension cord suitable for out-
door use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
 If operating a power tool in a damp location is unavoidable, use a residual cur-
rent device (RCD) protected supply. Use of an RCD reduces the risk of electric
shock.
Bosch Power Tools
English | 21
1 609 92A 1F9 | (11.8.15)

Publicité

Table des Matières
loading

Table des Matières