Charging The Battery - Peaq PPA34BT-B Mode D'emploi

ENGLISH
Operation
TURNING ON/OFF
To turn on, press and hold the
ton for approx. 3 seconds. Press the
button until the speaker turns off.
ADJUSTING THE VOLUME
Press and hold the button
adjust the volume. The adjusted level
will be shown through the increasing
or decreasing white LED light effect.
CARRYING STRAP
You can use the carrying strap to hang
the speaker, e.g. on a hook.
MODE
Press the M (MODE) button shortly to
switch manually between BT or AUX
mode.
The mode will be announced.
AUX mode will only be announced,
when the product is connected with
an external player via an AUX IN cable.
16
M_PPA34BT-B_W_171026_V08_HR.indb 16
All manuals and user guides at all-guides.com

Charging the battery

1. Connect the USB cable (included)
but-
2. Connect the other end of the USB
3. During the battery charging the
or to
LED Status
• Red:
• Blue:
to the speaker.
cable to the USB port of the com-
puter or a USB-charger.
LED indicator lights continuously
red.
LED turns on continuously: Bat-
tery charging.
LED turns off: Battery charging
complete.
Note
During the battery charging pro-
cess the speaker can be operated
in Bluetooth mode. It will take ap-
®
prox. 4 hours to be fully charged the
battery.
LED flashing: Turn on and ready for
Bluetooth pairing.
®
LED continously on: Paired with a
Bluetooth device.
®
26/10/17 2:27 pm