Charging The Battery - Peaq PPA10BT-B Mode D'emploi

ENGLISH
Charging the
battery
1. Connect the USB cable
(included) to the speaker.
2. Connect the other end of
the USB cable to the USB
port of the computer or a
USB-charger.
3. During the battery charg-
ing the LED lights continu-
ously red.
38
_PPA10BT_150508_V05_HR.indb 38
Note
LED turns on continuously:
Battery charging.
LED twinkles: Battery must
be re-charged.
LED turns off: Battery charg-
ing complete.
The speaker can still be
used during charging. It will
take approx. 2 hours to fully
charge the battery.
Pairing
1. Press On/Off button until
the LED turns on blue. The
speaker is ready for pair-
ing, when the LED twin-
kles in red-and-blue and a
sound is chimed.
8/5/15 3:13 PM