Setting Up And Connection; Disposal Of The Packaging; Requirements For The Place Of Use - Beem Latte Creme Notice D'utilisation

All manuals and user guides at all-guides.com

Disposal of the packaging

The packaging protects the device against damage during tran-
sit. The packaging materials have been selected according to
environmental and waste disposal aspects and can therefore be
recycled.
Recycling the packaging material for further use saves raw mate-
rials and reduces the waste. When no longer required, dispose of
the packaging materials in accordance with the local regulations.
NOTE
If possible, keep the original packaging during the warranty
►
period in order to pack the device properly in the event of a
warranty claim. Transport damage will invalidate the warran-
ty.

Requirements for the place of use

For safe and trouble-free operation of the device, the place of
operation must satisfy the following requirements:
Place the device on a level, heat resistant surface that is also
■
resistant to splashing milk.
Do not place the appliance in a hot, wet or very humid envi-
■
ronment or in the vicinity of inflammable materials. There must
be a gap of at least 15 cm between the device and any walls,
furniture or other objects.
Select a location that does not allow children to reach the hot
■
surfaces of the device.
The device is not intended to be mounted.
■
The mains socket must be easily accessible so that the plug
■
can be quickly pulled out in an emergency.
BEEM - Elements of Lifestyle

Setting up and connection

EN
39