Control panel, see section on 'Use' for an explanation of the control panel.
Installation
Installation without support plate
Without
support plate
Outdoor unit
Attach the large brackets to the outdoor unit of the air-conditioner by crosswise
tightening two screw caps per bracket. (Two screw caps are already present in their
place and two screw caps are supplied separately with the appliance).
Hang the outdoor unit on its place on the window. Place the indoor unit on a table
or something similar. Watch out: on the interior side of the large brackets is a
removable block. This had to be removed in certain caravans (with thicker walls or
window frames).
18