Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
__NAS280611_Haarschneider_kompakt_B1.book Seite 91 Montag, 7. November 2016 2:20 14
•
Slide the new blade unit 1 into the hair trimmer from the
front until it clicks into place.
Dry cleaning of the blade unit
•
Use the cleaning brush 9 supplied to remove residual hairs
from the blade unit 1 after every use.
Wet cleaning of the blade unit and hair trimmer
The hair trimmer and blade unit 1 may be cleaned under clean
running water.
1. Remove the comb attachment 7, if necessary.
2. Clean the blade unit 1 and the hair trimmer under running
water.
3. Allow the parts to dry completely.
Oiling the blade unit
For oiling, use the oil 10 supplied, or an acid-free oil, e.g. sew-
ing machine oil.
•
Every 6 months or so, apply a few drops of oil onto the cut-
ting blade of the blade unit 1 from above.
•
Switch the device on for a few minutes to spread the oil
around.
•
Using a soft, lint-free cloth, wipe off the surplus oil, if neces-
sary.
91
GB
Publicité
Table des Matières
