TSI Q-Trak XP 7585 Guide De Démarrage Rapide page 4

3. The instrument is now ready for use with the battery.
This Power Gauge calibration procedure does not
need to be repeated unless the battery is replaced or
disconnected.
Operating the Instrument with the
AC Adapter
The instrument can be operated with or without a battery
using the A/C adapter.
To operate the
instrument with
AC adapter:
1. Plug the AC
adapter into an
electrical outlet.
2. Plug the other
end into the
instrument.
Powering ON the Q-Trak™ XP
IAQ Monitor
1. Press and release the power button
35 seconds the instrument is ready for use.
2. The first time the Q-Trak™ XP monitor is powered ON
the Welcome to Q-Trak
Select the appropriate Language and Time Zone then
select DONE.
3. After selecting DONE, the Dashboard page is
displayed in Survey mode.
. In
TM XP page is presented.
Main Menu
To display the Main
Menu, select the
icon in the upper left
corner of the header
on any page of the
display.
Select Settings to
setup the following:
Manuals, Software, and Other
Resources
•
User Manuals, App Notes, and other resources are
available for download at www.tsi.com/7585, click on
the "Resources" tab.
•
TrakPro™ Ultra Software is available at:
https://tsi.com/support/tsi-software-and-firmware/
enter the search term Q-Trak XP.
-4-
and