Bose WAVE RADIO II Notice D'utilisation page 16

Connecting Other Equipment
Using your Wave
On
Off
AUX
Connecting your Wave
16
All manuals and user guides at all-guides.com
® radio II with other audio equipment
When using a TV, VCR, computer, video game or cassette tape player, you can enhance your
listening experience by playing the audio device through your Wave
Connecting an audio device to your Wave
• Male-to-male
3.5 mm (
• Dual RCA male to
3.5 mm (
stereo cable
To obtain the correct cable, contact Bose
See the phone numbers listed inside the back cover of this guide.
To connect an audio device, such as your TV, to your Wave
1. Connect one end of the stereo cable to the output of the audio device.
2. Connect the other end of the cable to the AUX IN connector on the rear panel of your
radio II.
®
Wave
3. Turn on your Wave ®
4. Press AUX.
5. Press and hold Volume
Note: If the volume level of your Wave
the volume level of the connected audio device.
TV
Dual RCA male to 3.5mm (
® radio II to a Lifestyle
®
You can use your Wave
®
enabled Lifestyle home entertainment system. Your Wave
for room B. To change this setting, see "Setting the room code" on page 21.
Contact Bose ® Customer Service to obtain the required cables and instructions. See the
phone numbers listed inside the back cover of this guide.
radio II, requires one of the following cables:
®
" stereo cable
1 )
/
8
"
1 ) male
/
8
® Customer Service or visit a local electronics store.
radio II and the audio device.
or to adjust the listening level.
® radio II cannot be adjusted high enough, try to increase
"
1 )
/
8
male stereo cable
® system
radio II as a multi-room expansion speaker system for a Bose
radio II.
®
®
radio II:
AUX IN
connector
radio II was set up at the factory
®
®
link-