Adjusting The Backrest - Be Cool outback Mode D'emploi

INSTRUCTIONS FOR ASSEMBLY AND USE
1. OPENING THE CHASSIS
1.a: Open the catch as the arrow direction.
1.b:Hold the handlebar with one hand, and hold the front
tube with another hand, then open the chasis as the arrows
direction until "click" sound.
A/ Release catch. B/ Unfold. C/ Lower footrest
2. ASSEMBLING THE FRONT WHEELS
2.a: Connect the front wheel to the connect pieces as the
arrow direction.
2.b: To close the swivel-function: lift up the swivel lock
button.
A/ Press the wheel release button
3. APPLYING THE BRAKES
A/ To put the brakes on: push the brake pedal down.
B/ To release the brakes: lift the lever up with your foot.
4. ADJUSTING THE STEERING
Push the level up/down to lock the steering.
5. BUMPER BAR
Press button A and pull the bumper bar to take it off.

6. ADJUSTING THE BACKREST

Press button , to set the backrest to the different positions.
7. FITTING THE HOOD
Press button to remove and fit the hood to the pushchair.
8. ADJUSTING THE FOOTREST
Press button , to set the footrest to the different positions.
9. ADJUSTING THE HANDLEBAR HEIGHT
Press the central button in the midle of the handlebar to
upwarkds or downwards.
10. ADJUST THE SEAT BELTS TO FIT THE CHILDREN WHENEVER
THEY USE THE PUSHCHAIR
The two side fastening points of the seats can be used to
attach an additional harness. Your pushchair is approved for
new born babies. To fit the belts on your baby when he is un-
der 6 months old, pass the shoulder straps through the lower
holes. When your child is over 6 months old, pass the straps
through the holes that are most comfortable for the child.
ATTENTION: THE PUSHCHAIR COULDN'T BE FOLDED WHEN
THE HAMMOCK IS FACING THE PUSHER AND THE HAMMOCK
IS ON THE UPRIGHT POSITION!
11. ATTACHING AND REMOVING THE SEAT / CHANGING THE
DIRECTION
OUTBACK is equipped with a reversible system that can be placed
forward facing or rear facing. 11a Adjust the backrest in an upright
position and lift the chair up and turn the chair. 11b Place the
backrest of the hammock in upright vertical position to attach with
the chassis and then bring down to coupling with the chassis until
fit correctly.
12. FOLDING THE PUSHCHAIR WITH THE SEAT
Close the hood and lift the seat upright. Press the safety button on
the bar and turn the handle in direction of the arrows and fold the
chassis until the locking trigger on the side A is well placed.
This manipulation is the same on both sides of the gear.
EN
23
9/7/19 12:10