Makita EM2650UH Manuel D'instructions page 25

For handheld engine: The Emissions
Compliance Period referred to on the Emissions
Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal emission
requirements.
Category C=50 hours, B=125 hours, and A=300 hours.
An Air Index Information hang tag was supplied to this engine in accordance with the emission regulations of the California Air
Resources Board.
The bar graph on the hang tag shows the emissions performance of this engine.
The bar graph can be used to compare the emissions performance with other available engine.
The lower the Air Index, the less pollution.
The following durability description is to provide you with information relating to the emission durability period of the engine.
Descriptive Term
Moderate –
Intermediate –
Extended –
Notice: The Air Index Information hang tag must remain on the engine or on the equipment until it is sold to the ultimate
purchaser. Remove the hang tag before operating the engine.
EMISSION COMPLIANCE PERIOD
AIR INDEX
Applicable to Emissions Durability Period
50 hours (0-65 cc)
125 hours (0-65 cc)
300 hours (0-65 cc)
25