The Remote Control System; Operating The Remote Control - GRAUPNER GM-Racing 90162.RTR Monster Truck MT6 Fuel 2WD Manuel D'utilisation

THE REMOTE CONTROL SYSTEM

Here you get an overview of the remote control system of the Monster Truck MT6 and its various func-tions
and settings. Before the fi rst trip should be sure all of these functions and settings have read and under-
stood.
Place 8 AA batteries in the battery compartment of the transmitter and a fully charged receiver-pack in the
battery box. Pay attention to the polarity!
REMOTE CONTROL (TRANSMITTER)
1. On / off switch: Turns the power on/off
2. Steering wheel: Controls direction (left/right) of the model
3. Steering trim: Adjusts the "hands off" direction of the model
4. Throttle Trigger: Controls speed (forward/brake) of the model
5. Throttle Trim: Adjusts the motor speed to stop at neutral
6. Control light: indicates adequate battery power
7. Antenna: Transmits signal to the model
8. Servo reverse: Reverses the function of the steering or throttle (here are no adjustments necessa-
ry)
The remote control system is optimally adjusted by the factory. Nevertheless you should read the following
chapter, maybe slight adjustments on the remote control should be necessary. For further information to the
remote control system please refer to the enclosed XG-6i manual.

OPERATING THE REMOTE CONTROL

• Run your Monster Truck MT6 never with low transmitter or receiver batteries.
• Never forget switch off the radio after running your Monster Truck MT6, otherwise the batteries do not
last long.
• Turn on the transmitter fi rst, then the vehicle.
• After driving fi rst turn off the vehicle, then the transmitter.
• For optimal use fi rst check the steering and throttle trim positions.
GM-Racing 90162.RTR Monster Truck MT6 Fuel 2WD
All manuals and user guides at all-guides.com
Power
Switch
Power
LED
Battery Cover
Antenna
Steering Trim
Steering Wheel
Throttle Trim
Brake
Stop/Neutral
Forward
06