Maxi-Cosi Foray LX Mode D'emploi page 11

WARNING
To avoid serious injury:
• Please refer to the manufacturer's instructions for the use of your infant car seat and bassinet.
• ALWAYS install car seat and bassinet facing to the rear of the stroller.
• ALWAYS use the restraint system in the car seat.
19
To Attach Maxi-Cosi Mico
Infant Car Seat and
®
Quinny Dreami
Push the parking brake down. Remove
stroller seat.
Adapters:
Align car seat adapters to towers and
push adapters onto towers until they
click into place (Figure 19). Adapter
"A" fits into tower "A". Adapter "B" fits
into tower "B."
Car seat:
Car seat must face the
handlebar.
Lower car seat onto towers until both sides "click" (Figure
19a). Pull up on seat to confirm it is secured in place.
To remove car seat, press both buttons on car seat (Figure
19b). Lift car seat up.
Dreami:
Position the dreami with the foot of the dreami toward the
handlebar as shown (Figure 19c).
Place the dreami on the adapters until you hear a "click."
Pull up on the dreami to ensure it is securely in place. The
dreami should not release without pushing the release buttons.
To remove dreami from stroller, press both release
buttons (1) while pulling up on the dreami (2) (Figure 19d).
All manuals and user guides at all-guides.com
®
Bassinet
TM
To Use
9
19
19a
19c
19b
19d