Set Ring; Call Waiting; Auto On Hook - Geemarc JUPITER 4 Notice D'utilisation

- Use or button to select one of these items.
- Press OK button to enter or press X button to exit.

2.1 - SET RING

There are 4 kinds of ring type.
- After entering the SET RING menu, press OK.
- Use or button to select the ring tone you prefer.
- Press OK button to confirm.
- Press X button to exit to the previous menu. (The default type is Type 3)

2.2 - CALL WAITING

- After entering the CALL WAITING menu, press OK.
- Use or button to select ON/OFF to activate/de-activate the call
waiting function.
- Press OK button to confirm.
- Press X button to exit to the previous menu. (The default mode is OFF)

2.3 - AUTO ON HOOK

- After entering the AUTO ON HOOK menu, press OK.
- Use
or button to select ON/OFF to activate/de-activate the auto
on hook function.
- Press OK button to confirm.
- Press X button to exit to the previous menu. (The default mode is OFF)
The auto on hook function allows you to disconnect the line automatically
about 8 seconds after dialling out if the line is busy.
SETTING UP
8