Geemarc SOLAR4 Notice D'utilisation

If you don't like the ringer melody, you can choose a new one by
changing the setting as follows:
- Lift the handset.
- Press button.
- Press # button.
- Press any button 0 to 9.
3 - WALL MOUNTING
To keep your handset in vertical position, slide out, turn
around and slide back in the wall mounting handset clip (which can be
found in the base unit, just below where the ear piece locates),this
ensure that the handset stays firmly in position.
USING THE TELEPHONE:
1 - ANSWERING INCOMING CALLS
When an incoming call is received, the telephone will ring.
To answer the call lift the handset and speak.
2 - MAKING A CALL
Lift the handset, await the dial tone and dial required
number. On completion of the call, carefully replace the handset in the
cradle.
3 - LAST NUMBER REDIAL
Lift the handset, await the dial tone and press the
button. The previously dialled number will be AUTOMATICALLY RE-
DIALLED ( not in use for memory numbers).
4 - RECALL, * & # BUTTONS:
These are used with the new services provided on digital
exchanges. For details please contact your network operator.
5 - MUTE BUTTON
If you wish to speak privately to someone else in the room
– without your caller overhearing – press and hold the
Your caller may still be heard during the MUTE operation. To resume
normal conversation , release the button.
6 - STORING TELEPHONE NUMBERS
- Lift the handset.
- Press button.
- Press one of the direct memory buttons, M1, M2, M3 or
VIP.
Or press MEM and any button 0 to 9 on the key pad under which you
wish to store the telephone number.
- Dial the telephone number you wish to store.
- Press button.
- Replace handset.
Note if you wish to change a number in a memory
location, simply follow the instructions for storing a number. Entering
the new number will automatically erase the previous number.
5
7 - DIALLING STORED TELEPHONE NUMBER FROM MEMORY
- Lift the handset and await dial tone.
- Press appropriate direct memory button M1, M2, M3 or
VIP. The stored number will be dialled out automatically.
Or press the MEM button followed by the keypad 0 to 9 button under
which the desired number is stored. The stored number will be dialled out
automatically.
GUARANTEE
From the moment your Geemarc product is purchased, Geemarc Telecom
SA guarantee is for the period of one year. During this time, all repairs or
replacements (at our option) are free of charge.
Should you experience a problem then contact our helpline or visit our
website at www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages to any
parts. The product must not be tampered with or taken apart by anyone
who is not an authorised Geemarc representative.
The guarantee of Geemarc Telecom SA in no way limits your legal
rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE
AND MUST BE RETAINED AND PRODUCED IN THE EVENT OF
A WARRANTY CLAIM
Please note: The guarantee applies to the United Kingdom only.
button.
For product support and help visit our website
DECLARATION: Hereby Geemarc Telecom SA declares that this product
is in compliance with the essential requirements and other relevant provi-
sions of the Radio and Telecommunications Terminal Equipment Directive
1999/5/EEC and in particular article 3 section 1a, 1b and section 3.
UGSOL4 ED01
at www.geemarc.com
telephone 01707 384438
or fax 01707 372529
6
User guide User guide User guide
User guide User guide
Notice d'utilisation Notice d'utilisation Notice d'utilisation
Notice d'utilisation Notice d'utilisation
S
OLAR4
F
INSTALLATION
1 - RACCORDEMENTS (Voir dessin)
Branchez le conjoncteur téléphonique dans la prise
téléphonique murale.
2 - SONNERIE
Un commutateur situé derrière la plaquette décorative
(voir dessin) permet d'activer ou de désactiver la sonnerie.
: sonnerie activée
: sonnerie désactivée
Le téléphone est livré la sonnerie activée.
Si le niveau de la sonnerie ne vous convient pas, sélectionnez un
nouveau réglage parmi les 9 proposés ci-dessous:
Faible Moyen Fort
Mélodie 1 1 2 3
Mélodie 2 4 5 6
Mélodie 3 7 8 9
Par défaut la sonnerie est en position 6. Suivez la procédure
décrite ci-dessous pour changer ce réglage :
- Décrochez le combiné.
- Appuyez sur la touche .
- Appuyez sur la touche #.
- Appuyez sur un chiffre de 1 à 9.
3 - POSITION MURALE (Voir dessin)
Pour maintenir votre combiné en position verticale,
retirez l'ergot situé sur la base, le tourner et le réinsérer.
1