Telephone Key Function; Regular Dialing; Using The Call Back Feature - Geemarc JUPITER 4 Notice D'utilisation

TELEPHONE KEY FUNCTION

1 - REGULAR DIALING

- Lift the handset or press the button.
- Enter the telephone number you want to call by pressing the appropriate
digits on the keypad.
PRE-DIALLING : Do not pick up the handset or press the button.
Enter the telephone number you want to call by pressing the appropriate
digits on the keypad. The pre-dialled number will be dialled out automatically
when you pick up the handset or press the button.
The dialed number will be shown on the LCD display.
The display will switch to the call timer mode. To stop the timer; press X
button and the timer can be reset by pressing again the X button.
2 - USING THE CALL BACK FEATURE (THE LAST 30 NUMBERS)
A. CALL BACK the outgoing number:
The unit can store up to 30 outgoing numbers.
- With the handset on-hook, press OK button once.
- Use or button to select the number you want to dial out.
- Then pick up the handset or press button, the phone number will
be dialed out automatically.
B. CALL BACK the incoming number (see CALLER ID SYSTEM
OPERATION for details, page 22)
15