Cooling Function For Bottles; Cleaning - Unold 8875 Notice D'utilisation

14. Approx. 2 minutes later the freezing is turned
on and the red control light turns on.
15. The display shows
remaining preparationt ime and the actual
temperature of the cooling bowl.
16. During operation, the appliance can be
stopped at any time by pressing the START/
STOP button for at least 2 seconds.
17. During operation the freezing time can
be extendeed by pressing the time select
button (Zeitwahl) in steps of 5 minutes up
to a max. freezing time of 50 minutes.
18. The appliance turns off automatically after
the preselected time. Ten beeps will sound.
The display shows „0:00". The ice cream
can be taken out.
19. If the ice cream is still too soft, you can
restart the appliance by pressing the START/
STOP button for at least 2 seconds. Select
the desired additional freezing time with the
time select button (Zeitwahl). Then press
the START/STOP button. The appliance will
restart for the preselected time and will then
return into the initial mode.

coolinG function for Bottles

1. For rapid cooling of bottles remove the ice
cream bowl (4) and place the bottle directly
into the recess (6).
2. Select a short operation time 10 minutes
and start the appliance. If necessary the
cooling time can be prolonged as described
above.

cleaninG

1. switch off and unplug the appliance. let the
appliance cool down.
2. Do not clean the appliance, the motor block
and the cord in or under water or any other
liquid.
3. Do not use any sharp or scouring clean-
4. sers which might damage the surface.
All manuals and user guides at all-guides.com
20. If the ice is not taken out within 10 minutes
alternatingly the
21. This function cools the ice cream in steps
22. Switch off and unplug the appliance before
23. To take out the ice cream first remove the
24. Take the ice cream bowl out and remove the
25. Fill the ice cream into an appropriate
26. You can now prepare new icecream, just
3. The best cooling effect will be reached, if
5. All removable parts except the motor block
6. The compressor housing and the motor
7. Dry all parts carefully before reassembling
after the beeps, the automatic freezing
function is activated to avoid the ice cream
from melting.
of 10 minutes for max. 1 hour. Then the
appliance returns into the starting mode.
taking out the ice cream.
motor block und then the transparent lid by
turning it counterclockwise.
mixer from the ice cream.
freezing container with lid. Do not use any
sharp tools, but preferably plastic or wood
spoons or spatulas.
restart at point 1 of this chapter.
the bottle top is covered with an isolating
collar. However, do not cover the ventila-tion
openings of the compressor housing.
can be cleaned in warm soapy water. The
parts are not dishwasher proof.
block can be wiped with a damp cloth.
the appliance.
17