Komet MicroKom BluFlex 2 Mode D'emploi page 24

KOMET MicroKom BluFlex ® 2
start-up
Press and hold the button to switch on the display.
Press and hold the button to switch between abso-
lute mode and difference mode.
Pressing the button briefly when in absolute mode
will take you to the settings.
From here, pressing the button briefly will take you
to the next setting, while pressing and holding the
button will change the selected setting.
If you are in the last setting („Rotate display"),
pressing the button briefly again will take you back
to the readings screen.
In difference mode, by contract, pressing the button
briefly will set the starting point for the difference
calculation.
If the device is not operated or the reading does not
change, the display will switch itself off.
Micro-adjustable heads with Bluetooth® technology:
If Bluetooth® is enabled, the display's automatic
switch-off time is extended.
We recommend cleaning the display regularly using
a solvent-free glass cleaner.
This will ensure that the display works as it should.
Bluetooth® is a registered trademark of Bluetooth SIG, Inc.
24
All manuals and user guides at all-guides.com
1 2 3 4
mm abs
+ 0.438
Unit mm
1
Absolute mode
2
3 Bluetooth® on
Battery level
4