Change Battery - Komet MicroKom BluFlex 2 Mode D'emploi

KOMET MicroKom BluFlex ® 2

change battery

- Unscrew the battery compartment (WAF 4)
- Change the 2/3 AA SL 761 lithium-ion battery
(check correct polarity)
- When screwing down the battery cover, check
that the O-ring is seated correctly and in per-
fect condition.
The O-ring must be replaced if it becomes
damaged.
Disposal information
The MicroKom BluFlex ® 2 preci-
sion drilling system must be dispo-
sed of in accordance with national
and local rules and regulations
as part of the normal recycling
process.
The product is subject to legally binding
disposal regulations at the end of its
useful life. At the time of
disposal, the following must
be observed: Components
submitted for recovery are
separated into: Electronics
scrap, iron scrap, aluminum,
plastic and battery.
In accordance with german battery
legislation, we are required to state
the following:
Do not dispose of old batteries along with household waste.
You can return used batteries free of charge to our shipping
depot. As a consumer, you are legally obliged to return old
batteries.
Batteries containing hazardous substances are marked with
a crossed-out wheelie bin and the chemical symbol (Cd,
Hg or Pb) that determines its classification as a hazardous-
substance-containing heavy metal:
22
All manuals and user guides at all-guides.com
+
–
Cd Hg Pb
1 2 3
„Cd" stands for cadmium
1
„Hg" stands for mercury
2
„Pb" stands for lead
3