English
5. Press "Signal" button, and the buzzer will sound upon end of a cycle.
• After switching on, the dryer automatically sets buzzer at "Softer". The user may
define three prompt sound conditions: "Louder", "Softer" and "Off".
6. Press the "Wrinkle Saver" button to select a suitable reserved drying program.
• This convenient feature helps keep wrinkles from setting when you cannot unload the
dryer at the end of a cycle. The dryer will stop and then tumble for a brief period
every few minutes. Press the wrinkle saver button to choose the number of hours you
want, from 3 to 24. Stop the setting at any time by pressing the wrinkle saver button
or opening the dryer door.
• If not set, the wrinkle saver indicator will be off and remaining the time indicator will
be displayed.
• The LED display indicates remaining time of a non-reserved program. If setting
"Wrinkle Saver" in standby status, the LED display indicates 3 hr, which will
increase by 1 hr with each press (until 24 and return to 3). If held for 1.5 seconds,
LED display indicated value will increase continuously.
7. Press "Touch Up" button to select wrinkle-proof drying mode.
• You can also use the "Touch Up" cycle to remove wrinkles from clean clothes
packed tightly in a suitcase or closet.
8. Press "Start/Pause" button
• When starting the machine, first close the door and then press this button.
• If pause is needed during machine operating, press this button. Pressing again will
resume operation.
Autodry Cycle Remain Time
Normal
Heavy
Whites
Start/
Bulky
Pause
Casual
Delicate
Touch Up
Custom Timed
0-180
Dry
minutes
Pass for Rack
Dry
• Wrinkle saver 3-24 hours
• Sensor Dry Levels: Very, More, Normal, Less, Damp
• Temp Levels: High, Medium, Low, Air Dry
• Signal: Louder, Softer, Off
19
All manuals and user guides at all-guides.com
60
52
65
62
35
35
25
40
60
Sensor
Temp
Dry Level
very
High
very
High
very
High
very
High
very
Medium
very
Low
N/A
Low
N/A
High
N/A
Air Dry
Signal
Softer
Softer
Softer
Softer
Softer
Softer
Softer
Softer
Softer