APPENDIX A
CAUTION: Tubing for use with the MASTERFLEX
Use of tubing other than that specified will result in poor pumping performance and/or
pump system damage and voiding of applicable warranty.
Available Microbore Autoanalysis Tubing
TYGON — Catalog prefix number 95609-XX available
in sizes 10 through 48.
TYGON LFL — Catalog prefix number 96429-XX available
in sizes -18, -26, -30, -34, -42 and -48.
Silicone (peroxide-cured) — Catalog prefix number
07625-XX available in sizes 22 through 48.
Silicone (platinum-cured) — Catalog prefix number
95590-XX available in sizes 18 through 48.
®
PHARMED
BPT — Catalog prefix number 95809-XX
available in sizes -12, -18, -26, -32, -36, -40, -44 and -48.
®
VITON
fluoroelastomer — Catalog prefix number
97632-XX available in sizes -26, -30, -34, -38, -42, -46 and -48.
®
C-Flex
— Catalog prefix number 95718-XX available in
sizes-10 through 48.
Solvent/Hydrocarbon – Catalog prefix number 95712-XX
available in sizes 10 through 48.
See the following table for Tubing size versus ID and
flow rates. Flow rates are for water pumped at room
temperature and 0 psi. Flow rates for silicone tubing
are approximately 25%–50% less than listed.
Flow rate is determined by drive, speed, tubing size
and material.
Printed in U.S.A.
10
All manuals and user guides at all-guides.com
®
®
C/L
Pump Systems is Microbore Autoanalysis Tubing.
Tubing
Tubing
Suffix.
ID
in (mm)
-10
0.008 (0.19)
-12
0.010 (0.25)
-14
0.015 (0.38)
-16
0.017 (0.44)
-18
0.020 (0.51)
-22
0.025 (0.64)
-24
0.030 (0.76)
-26
0.035 (0.89)
-28
0.040 (1.02)
-30
0.045 (1.14)
-32
0.051 (1.30)
-34
0.056 (1.42)
-36
0.060 (1.52)
-38
0.065 (1.65)
-40
0.073 (1.85)
-42
0.081 (2.06)
-44
0.090 (2.29)
-46
0.100 (2.54)
-48
0.110 (2.79)
All flow rates based on pumping water @ 0 psig 70°F (21°C).
Flow Rate
60 rpm
6 rpm
(µL/min)
(µL/min)
128
13
178
17
378
45
490
55
698
70
1110
105
1580
150
2110
205
2680
270
3290
335
4130
420
4900
495
5510
555
6330
630
7650
750
8910
875
10160
1015
11340
1170
12340
1330