Lenze L-force X400 Instructions De Mise En Service page 32

3 Commissioning
Step−by−step commissioning
Commissioning step
1. Connect keypad to the diagnostic interface.
2. If the keypad is supplied with voltage, it
carries out a short self test.
3. The keypad is ready for operation if it
displays the main menu.
4. You can now communicate with the basic
device.
32
Comment
You can also connect or remove the keypad
during operation.
If you commission the keypad for the first
time, you are requested to select the dialog
language.
How to navigate through the menus and how
to view and alter parameters can be learned
here: ^ 33
l
EDBZAEBK000X DE/EN/FR/ES/IT 4.0