Maintenance; Calibrating The Scale; Cleaning The Scale - Etekcity FIT 8S Mode D'emploi

Maintenance

Calibrating the Scale

If the scale has been moved or flipped upside down, it must be calibrated
to ensure accurate results.
1. Place the scale on a hard, flat surface.
2. Step on the scale with 1 foot until digits appear on the display
2.1]. Then, step off.
[Figure
3. The scale will show " " while calibrating, then "
complete
[Figure
Figure 2.1

Cleaning the Scale

Use a slightly damp cloth to clean the surface of the scale, followed
•
by a soft, dry cloth to wipe away any remaining moisture.
Do not use chemical or abrasive cleaning agents to clean the scale.
•
2.2].
18
" when
Figure 2.2