DURAVIT sensoWASH D-CODE Notice D'utilisation page 49

The water in the tank is not heated until the seat sensor is activated. The seat
is not heated either until the seat sensor is activated.
7.2 Rearwash
> Press the "Rearwash" button <
The spray wand moves out and sprays a water jet for about one minute. This func-
tion is then stopped automatically.
> Press the "Stop" button <
All of the functions that are currently active will be terminated.
After the "Rearwash" function has stopped, the spray wand is cleaned auto-
matically for about three seconds. The spray wand retracts during this time and is
flushed all-round with water.
If the "Rearwash" button is pressed <
cleaning continues for another minute.
During the cleaning process the water temperature and water pressure (see 8.5 -
8.8) can be adjusted to suit the user's personal preferences.
If the seat sensor does not detect any user on the seat, then the SensoWash
will not function.
All manuals and user guides at all-guides.com
> on the control panel.
4
5 > on the control panel.
> once again during the cleaning process,
4
EN
D-Code
®
41