DURAVIT sensoWASH D-CODE Notice D'utilisation page 51

7.3 Ladywash
> Press the "Ladywash" button <
The spray wand moves out and sprays a water jet for about one minute. This func-
tion is then stopped automatically.
> Press the "Stop" button <
All of the functions that are currently active will be terminated.
After the cleaning, the spray wand is cleaned automatically for about three
seconds. The spray wand retracts during this time and is flushed all-round with water.
If the "Ladywash" button is pressed <
cleaning continues for another minute.
During the cleaning process the water temperature and water pressure (see 8.5 -
8.8) can be adjusted to suit the user's personal preferences.
If the seat sensor does not detect any user on the seat, then the SensoWash
will not function.
7.4 Comfortwash
> Press the "Comfortwash" button <
or Ladywash function. The oscillation function is activated.
During this function, the spray wand carries out forward and backward movements
automatically.
> Press the "Stop" button <
All of the functions that are currently active will be terminated.
If the seat sensor does not detect any user on the seat, then the SensoWash
Code will not function..
42
All manuals and user guides at all-guides.com
> on the control panel.
3
> on the control panel.
5
> on the control panel.
5
> once again during the cleaning process,
3
> on the control panel during the Rearwash
2
D-Code
®
D-
®