List Of The Equipment Supplied; Installing The Chlorinator; Hydraulic Connections Of The Cell; Horizontal By-Pass Configuration - AQUALUX Electrolyseur 50 m3 Notice D'installation Et D'entretien

4 List of the equipment supplied

Your chlorinator is supplied with the following equipment :
•
1 complete electrolysis cell.
•
1 electric control unit.
•
1 cell power supply cable.
•
1 automatic cover contact cable
•
1 wall mounting kit.
•
2 short 63/50 reducers.
•
2 cable glands to be installed on the unit.
•
1 salt/hardness analysis kit.
•
1 installation and user's manual

5 Installing the chlorinator

For safety reasons, the chlorinator must be electrically slaved to the water flow rate in the by-pass and filtration.

5.1 Hydraulic connections of the cell

The chlorinator's cell must be installed on the return circuit ( clean water) downstream from the filter and any heating
systems (particularly electric heater)
A « by-pass » installation is recommended so that it is easier to work on the chlorinator and for wintering purposes.
The electrolysis cell can be positioned anywhere but it is preferable to use a configuration that facilitates the evacuation
of air bubbles.

5.1.1 Horizontal by-pass configuration

5.1.2 Vertical by-pass configuration

NOTESAQX FRGBIT - IND B - 02/2012
All manuals and user guides at all-guides.com
16 / 36