4/ Setting Of The Parameters; Control Panel; Adjusting Ph Setting - AQUALUX DUO Electrolyse + pH 40 Notice D'installation

4/ SETTING OF THE PARAMETERS

1

CONTROL PANEL

Long press :
ON/OFF
Short press : turn
pH/salt
Keys for the control
menu
When the device turn on, it displays butcher, then software version number (ex: 02.03), then again the
butcher and finally main screen.
On the startup of the device, it is possible that pH regulation start directly with calibration mode "CA".
PH regulation function will be blocked when the first calibration will be effectuated:
- Press on
V
To tip over from one or other function (pH/electrolysis), press on the key
By default, the pH function is seen on display. If electrolysis display is inactive after 30 s then screen
goes back automatically on pH display.
ADJUSTING THE pH SETTING
2
When screen appears pH value, to reach adjustment menu: press on key
 Select the function code using
 Select the wished value with keys
The value is frozen and the device returns to main menu.
DUO AQUALUX – PAPI004070 – FR – EN – DE – Rev.03.16
to launch the probe calibration procedure (cf. §6.3)
,
Display of the actual
pH value
V
and confirm by .
, then confirm by
Indicator
Production
Indicator
C
.
V
during 3 seconds.
V
.
Alarm
9