Tuning To Preset Stations; Technical Data - Philips MZ-5 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Tuner
2 Press PROGRAM on the set or remote control
for more than 2 seconds to activate
programming.
AUTO is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by AM. The last preset
automatically stored will then be played.
Press 9 on the set to interrupt auto
programming.
Manual programming
1 Tune to your desired station (see Tuning to radio
stations).
2 Press PROGRAM on the set or remote control
to activate progr amming.
PROGRAM flashes in the display .
3 Press PRESET 4 or 3 (¡ or ™ on the remote
control) to allocate a number from 1 to 40 to
this station.
4 Press PROGRAM again to confir m the setting.
PROGRAM disappear s, the preset number
and the frequency of the preset station are
shown.
5 Repeat the above f our steps to store other
stations.
• You can overwrite a preset station by storing
another frequency in its place .

Tuning to preset stations

Press PRESET 4 or 3 (¡ or ™ on the remote
control) until the desired preset station is
displayed
Note: All preset stations will be lost and need to be
reprogrammed.
16

Technical data

Amplifier
Output po wer . . . . . . . . . . . . . . . . . . . . . . . 2 x 15W FTC
Signal-to-noise-ratio . . . . . . . . . . . . . . . . . . ≥ 65 dB A (IEC)
Input sensitivity AUX . . . . . . . . . . . . . . . . 0.5 V (max. 2 V)
Impedance speaker s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Ω
. . . . . . . . . . . . . . . 32Ω -1000 Ω
Impedance headphones
8 Ω, 1KHz, 10% THD
(1)
Tuner
FM waveband . . . . . . . . . . . . . . . . . . . . . . . . 87.5 - 108 MHz
AM waveband . . . . . . . . . . . . . . . . . . . . . . . 530 - 1700 kHz
Sensitivity at 75 Ω
– mono , 26 dB signal-to-noise r atio . . . . . . . . . 2.8 µV
– stereo, 46 dB signal-to-noise r atio . . . . . . . . 61.4 µV
Selectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≥ 28 dB
Total har monic distor tion . . . . . . . . . . . . . . . . . . . . . ≤ 5%
Frequency response . . . . . . . . 63 - 12,500 Hz (± 3 dB)
Signal-to-noise-r atio. . . . . . . . . . . . . . . . . . . . . . . . ≥ 50 dBA
CD player
Frequency r ange . . . . . . . . . . . . . . 20 - 20,000 Hz (8 dB)
Signal-to-noise-r atio . . . . . . . . . . . . . . . . . . . . . . . . . . 75 dB A
Speakers
2-Wa y Bass reflex system
Dimensions (wxhxd) . . . . . . . . . . . 170 x 182 x 216 mm
General
Dimensions (wxhxd) . . . . . . . . . . . 164 x 158 x 254 mm
Weight (with / without speaker s) approx.7.5 / 3.7 kg
Standby power consumption. . . . . . . . . . . < 7 W
Subject to modification
(1)
(6.7" x 7.2" x 8.5")
(6.5" x 6.2" x 10")
(16.5 lb / 8.15 lb)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mz537

Table des Matières