Panasonic CF-VDL02 Mode D'emploi page 12

Adjusting the LCD Monitor
(Color)
Color
Auto Balance
RGB
Color Temperature
(Position)
E
Position
H-Position
V-Position
Auto Center
(Image)
Image
Phase
Clock
Auto Phase
12
All manuals and user guides at all-guides.com
The Color menu is used to adjust the brightness of Red, Green, Blue, or all color
channels.
Select the item by pressing
Auto Balance
Select , the color is adjusted automatically.
To save the adjusted value, select [Color Temperature], then press
RGB
The sub-menu is displayed.
Select the item by pressing
1
The sub-menu is displayed.
Adjust by pressing
2
Color Temperature
The sub-menu is displayed.
Select the item by pressing
The Position menu allows the adjustment of image position in Analog input mode.
Select the item by pressing
H-Position
H-position is used to adjust the horizontal image position manually. A slider and
the current value are displayed. The adjustment range is 0 to 127.
Adjust by pressing
V-Position
V-position is used to adjust the vertical image position manually. A slider and the
current value are displayed. The maximum value for Vertical Position is to 1 to 47.
(Depending on the RGB input signal, the upper value of this range may be below
47.)
Adjust by pressing
Auto Center
A confirmation box is displayed. The default selection is [Yes]. Press
the position automatically. If you want to cancel, select [No] and press
To save the adjusted value, select [H-Position] or [V-Position], then press
The image menu allows the adjustment of ADC clock and phase in Analog input
mode.
Select the item by pressing
Phase
Phase adjustment is used to adjust the ADC sample pixel clock. A slider and the
current value are displayed. The adjustment range is 1 to 31, representing 0-360
degrees.
Adjust by pressing
Clock
Clock adjustment is used to adjust the number of clocks per line (samples per line).
A slider and the current value are displayed.
Adjust by pressing
Auto Phase
A confirmation box is displayed. The default selection is [Yes]. Press
the phase automatically. If you want to cancel, select [No] and press
To save the adjusted value, select [Phase] or [Clock], then press
or , then press .
or , then press
or , then press . (If you want to cancel, press
or , then press .
or , then press .
or , then press . (If you want to cancel, press
or , then press . (If you want to cancel, press
or , then press .
or , then press . (If you want to cancel, press
or , then press . (If you want to cancel, press
.
.
)
)
)
to adjust
.
.
)
)
to adjust
.
.