30
Product description
PRODUCT DESCRIPTION
Built-in Gas Hob Class 3
General overview
Control knob
OPERATION
Ignition of the burner
WARNING!
Be very careful when you use open fire in kitchen environment. Manufacturer decline any
responsibility in case misuse of the flame
Always light the burner before you put cookware.
To light the burner:
1.
Turn the control knob counterclockwise to the maximum position (
down.
2.
Keep the control knob pushed for approximately 5 seconds; this will let thermocouple
to warm up. If not, the gas supply will be interrupted.
All manuals and user guides at all-guides.com
1
2
3
Symbol
1
Burner (minimum pot size = 220 mm)
2
Glass bar
3
Control knob
Description
no gas supply / off position
ignition position / maximum gas supply
minimum gas supply
) and push it