Cleaning/Maintenance; General Cleaning Work; Cleaning The Filter Insert; Cleaning & Maintenance - Parkside PNTS 1500 B3 Traduction Des Instructions D'origine

Aspirateur eau et poussière
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Place the thicker end of the powertool hose
(19) straight onto the vacuum hose (18)
and the other end onto the reduction adap-
tor (20) supplied. You can now fit vacuum
nozzles or an electrical tool.
The reduction adaptor also fits onto
the vacuum hose (dust vacuuming
without the powertool hose).

Cleaning/Maintenance

Pull out the mains plug.
Danger of electric shock.

General Cleaning Work

Never hose the appliance
down with water. Never use
aggressive cleaning agents
or solvents. This could dam-
age the appliance.
After use, empty the waste tank (
5). Opening the drain plug to allow the
vacuumed liquid to drain out (
Clean the waste tank with a damp
cloth.
Wash the foam filter with lukewarm
water and soap, and allow to dry.
Beat the dust out of the cloth filter
(
11) and clean it with a paint brush
or hand brush.
Replace the paper filter bag (
when full (see "Replacement parts/Ac-
cessories" for reordering)
Always check the appliance before
use for any obvious faults such as a
defective mains cable, and have these
repaired or replaced.
All manuals and user guides at all-guides.com
7).
12)

Cleaning the filter insert

Check the filter insert for dirt once or twice
per year.
1. Open the cover (27) on the mo-
tor head (3):
Closure upward in
position
Remove the cover.
2. Take the filter insert (28) out of
the cover (27).
3. Wash the filter insert (28) with
lukewarm water and soap and
leave it to dry.
4. Place the filter insert (28) in the
cover (27) and reclose it:
Closure downward
in position
Maintenance
The device is maintenance free.

Storage

1. To store the mains cable on the back of
the device, pull out the top cable holder
(29a) and turn the bottom cable holder
(29b) outwards.
Wind the mains cable (2) around the
cable holders (29a+b) on the back of
the device.
2. Wind the vacuum hose (18) around
the motor head (3). The two retaining
brackets (25) hold the vacuum hose in
place.
3. Place the telescopic suction tube into the
accessory holder on the unit's feet (6a).
4. The bag provided is designed for stor-
ing the small accessories (14).
5. Store the appliance in a dry place and
out of reach of children.
GB
OPEN
CLOSE
4 1

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

275083

Table des Matières