Assembly - Parkside PNTS 1500 B3 Traduction Des Instructions D'origine

GB
edges.
• Make sure that the mains voltage
corresponds with the information
on the rating plate.
• Only plug the appliance into a
socket which is safeguarded by
at least 16 A.
• The device must only be con-
nected to a mains socket via a
residual-current circuit breaker
(RCD) with a rated leakage cur-
rent of not more than 30 mA.
CAUTION! The following
states how damage to the ap-
pliance and possible injury to
people can be avoided:
• Ensure that the machine is cor-
rectly assembled and the filters
are in the correct position.
• Do not use without the filter. This
could damage the machine.
• Only use replacement parts and
accessories delivered and recom-
mended by our Service Centre.
The use of parts by other manu-
facturers immediately renders the
guarantee void.
• Only have repairs carried out at
our authorised customer service
points.
• Observe the instructions for
cleaning and maintenance of the
machine.
• Store the appliance in a dry place
and out of reach of children.
3 8
All manuals and user guides at all-guides.com

Assembly

Pull out the mains plug.
Danger of electric shock.
1. Attach the feet (6) to the housing:
- The feet with wheels (6a) num-
bered  + ‚
into the appropriate adaptors
on the rear side of the waste
collector (see
- The feet with guide rollers
(6b) must be fitted to the hold-
ers on the front side of the
container (5).
2. Secure the feet with the Philips
head screws supplied.
3. Place the motor housing (3) on
top of the collector (5) and close
it with the clip.
4. Lightly squeeze together the
ends of the retaining bracket
(25) and click it into the motor
housing (3).
5. Installing the accessories:
- Attach the vacuum hose (18).
- Fit the handle with air control
(15).
- Install the telescopic suction
tube (16). (Press the button on
the telescopic suction pipe to-
wards and pull out to the
desired length).
- Install the nozzle desired (
21/22/23/24).
must be fitted
small picture).