Rear Panel; Power Switch - Peavey LN1063 Mode D'emploi

Rear Panel

14
ON
15
T5 AL/250V 100-240V~ 50/60Hz
Power Consumption : 40W
16
Consumo de energia 40Wh

(14) Power Switch

The power switch is used to turn the speaker on and off
(15)Fuse
This is the main safety fuse for the AC line voltage. Only replace with a fuse of the exact type and rating. If the
fuse continues to fail, do not replace the fuse again. Take the unit to an authorized Peavey service center.
(16) AC Power Inlet
This is the receptacle for an IEC line cord, which provides AC power to the unit. Connect the line cord to
this connector to provide power to the unit. Damage to the equipment may result if improper line voltage is
used. (See line voltage marking on unit).
Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not
have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded
properly. To prevent risk of shock or fire hazard, always make sure that the amplifier and all associated
equipment is properly grounded.
7
POWER
FUSE