Peavey LN1063 Mode D'emploi page 10

speaker. To disconnect, press the button again, it will turn the Bluetooth off (LED dark).
(7) Master Level
Use to control the overall volume of the speaker system.
(8) Power/Limit LED
The Power/Limit LED will illuminate blue when there is power applied to the speaker and the power switch (14)
is in the "on" position. It will turn RED when the system has reached its maximum output.
Input Panel
11 12 13
10
9
(9) XLR Mic Input (Ch 1&2)
Use this XLR connector to connect a microphone to the LN1063 mixer.
(10) Input Select Switch (Ch 1&2)
The Power/Limit LED will illuminate blue when there is power applied to the speaker and the power switch (14)
is in the "on" position. It will turn RED when the system has reached its maximum output.
(11) 1/4" Stereo Inputs (Ch 3&4)
- Channels 3 and 4 are a stereo pair of 1/4" jacks (TRS) that can be used for a stereo or mono line level source. If
only one jack (L/Mono) is used, it behaves as a mono source. Once both jacks are connected, it becomes a stereo
source; 3 is Left and 4 is Right.
(12) 3.5mm Stereo Inputs (Ch 5&6)
Channels 5 and 6 is a stereo 3.5mm jack that can accept a stereo line input from the output of an MP3 player,
phone or other similar device.
(13) XLR Line Output
This is a non-powered XLR output at line level that can be used to link systems together or feed additional speak-
ers.
6