Publicité
Top Panel
MIN
2
-12
3
-12
MIN
(1) Channel Reverb Control
This knob controls the amount of reverb for the corresponding channel (channels 1-2).
(2) High EQ (treble) Control
This is an active tone control (shelving type: +/-15dB) that varies the level of the high frequency range.
(3) Low EQ (Bass) Control
This is an active tone control (shelving type: +/-15dB) that varies the level of the low frequency range.
(4) Channel Level
This knob controls the level of the specific channels audio in the mix.
(5) Bluetooth/Aux Input Switch
This switch selects the audio source for channel 5/6. Push to the left to route the Bluetooth signal to the channel.
Push to the right to route the Aux input from the 3.5mm Stereo Jack (12) to the channel.
(6) Pair Button/LED
This button is used to pair a phone or Bluetooth source to the speaker. The LED will indicate if it is in discovery
mode (blinking) or paired to a Bluetooth source (solid). Pushing the button turns on the Bluetooth and places the
speaker in discovery mode (blinking LED). Now you should be able to connect any Bluetooth audio source to the
5
1
MAX
MIN
MAX
HIGH
HIGH
+12
-12
+12
LOW
LOW
+12
-12
+12
LEVEL
LEVEL
MAX
MIN
MAX
CH1
CH2
4
HIGH
-12
+12
LOW
PAIR
-12
+12
LEVEL
LEVEL
MIN
MAX
MIN
CH3/4
CH5/6
AUX
5
6
8
6
POWER/LIMIT
LEVEL
MAX
MIN
MAX
MASTER
7
Publicité
