Start A Session - Gallagher TWR-5 Guide De Démarrage

Gallagher TWR- Weigh Scale Quick Start Guide
Refer to Bluetooth – Connect EID Reader in the TWR-5 On-screen Help or your EID
Reader User Manual for further informa on on pairing the reader.
Connecting to a Drafter/Sorter
To connect the TWR- to a dra er, use the data cables supplied with your dra er.
Refer to your Dra er User Manual for more informa on.
1. Turn On the TWR- .
2. On the TWR- , tap
3. Specify the type of dra er that is being connected, to complete the setup.
If your dra er is not listed, tap
wizard set up your dra er.

START A SESSION

When you gather informa on about an animal, it is recorded in a Session.
Each event such as weighing, adds a record to the current session.
A template using pre-determined defaults can be set up and used each me you
start a new session.
Note: It is recommended a new session is opened for a new day's ac vity or for
a new group of animals. An animal cannot appear within the same session more
than once.
To start a new weighing session:
1. From the Home screen, tap
displayed.
Quick Start
2. Tap
Note: To set up and use templates, refer to the TWR-5 On-board Help.
Note: Before weighing,
3. Load the animal onto the pla orm.
Se ngs > Equipment Connec ons > Dra er
Create Custom
New
to open the Weigh screen with the scale default se ngs.
0.0
should be displayed. If not, press
and follow the confi gura on
. The New Session screen is
To customize the session:
click on the
bu on at the lower le of
the screen. Here you can
set up the weighing mode,
dra ing op ons, traits and
name for the session. Refer
to Session Op ons
more informa on.
.
OPTIONS
(p. 11) for
.
9