Accessories, Consumables - Hilti AG 125-A22 Mode D'emploi

2.9 DG-EX 125/5" dust removal hood for grinding 5
The power tool is suitable only for occasional use with diamond cup wheels for grinding mineral materials.
CAUTION
Use of this guard for working on metal is not permissible.
NOTE
It is recommended that a dust removal system consisting of matched components, i.e. dust removal hood and a
en
suitable Hilti vacuum cleaner, are used for cutting and slitting mineral materials, such as concrete or stone. These
serve to protect the operator and increase the life of the power tool and disc used.
2.10 Lithium‑ion battery charge status
When the lithium-ion battery is in use, the charge status can be indicated by gently pressing one of the battery release
buttons (press until resistance is felt - do not release the battery). The display on the rear of the battery provides the
following information:
LEDs light constantly
LED 1, 2, 3, 4
LED 1, 2, 3
LED 1, 2
LED 1
-

3 Accessories, consumables

Accessories for the AG 125‑A22
Designation
Battery
Battery
Charger for Li-ion batteries
Charger for Li-ion batteries
Charger for Li-ion batteries
Discs with a diameter of max. 125 mm, designed for a speed of 9500/min and a peripheral speed of 80 m/sec,
and with a maximum thickness of 6.4 mm (abrasive grinding discs) or 2.5 mm (abrasive cutting discs).
Discs
Abrasive cutting disc
Diamond cutting disc
Abrasive grinding disc
Diamond grinding disc
Assignment of discs to the equipment used
Item Equipment
A Guard
B Front cover (in combin-
ation with A)
C Guard with cover plate
(optional for A, B)
D DG‑EX 125/5" surface
guard
20
All manuals and user guides at all-guides.com
LEDs blink
-
-
-
-
LED 1
Short designation
B 22/2.6 Li‑Ion
B 22/3.3 Li‑Ion
C 4/36, C 4/36‑ACS or C 4/36‑ACS TPS
C 4/36‑90
C 4/36‑350
Application
Cutting, slitting
Cutting, slitting
Rough grinding
Rough grinding
AC‑D AG-D
X X
-
X
-
X
- -
Charge status C
C ≧ 75 %
50 % ≦ C < 75 %
25 % ≦ C < 50 %
10 % ≦ C < 25 %
C < 10 %
Designation Material
AC‑D metal
DC‑D mineral
AG‑D, AF‑D, AN‑D metal
DG‑CW mineral
AF-D AN-D DG‑CW
X X X
- - -
- - -
- -
X
DC‑D
X
X
X
-