Operating - Bartscher 200.641 Mode D'emploi

Outdoor setup (with stand)
•
Place the device on a flat surface which will allow for stability.
•
If an extension cord is necessary, ensure that it is one suitable for outdoor use.
•
The extension cord must be dry and kept off the ground.
•
Locate the device in such a place that the power cord does not dangle over any
edges nor can be tripped over.
•
Never move the device by pulling the power cord. Always use the handles to move
the device. Always unplug the device prior to moving it. Ensure that the cord does
not dangle. Do not wrap the cord around the device and do not bend it.

5.3 Operating

Preparing the device for grilling
•
Prior to use, insert the grease tray into the guides located under the griddle.
•
Remove the protective cover from the thermostat.
•
Put the thermostat in the „OFF" position, then insert the plug into the side of the grill.
CAUTION!
Always adjust the thermostat first, and only then insert the plug into a socket. To
turn the device off, place the thermostat in the „OFF" position and then remove
the plug from its socket.
CAUTION!
Use only the thermostat included with the device!
•
Insert the plug into a grounded single socket.
NOTE!
For best results, wipe the external surface of the cover with vegetable oil. If
necessary, remove excess oil with a paper towel.
•
When everything is ready for grilling, set the thermostat to the appropriate
temperature. The thermostat control light will come on, indicating that the device is
heating up. When it goes off, that indicates that the desired temperature has been
reached and the device is ready to grill.
•
While in use the control light will come on and off intermittently. This indicates that the
device is heating up in order to maintain the desired temperature.
- 26 -
All manuals and user guides at all-guides.com