Control Elements; Mounting The Lcd Monitor - Waeco PerfectView M71L Instructions De Montage Et De Service

_RV-71_EB_10s.book Seite 24 Freitag, 2. Februar 2007 1:21 13

Mounting the LCD monitor

5.2

Control elements

The following control elements are located on the monitor:
No. in
fig. 0, Description
page 6
1
2 –
3 +
4 M
5 V1/V2
6
6 Mounting the LCD monitor
6.1 Tools required (fig. 1, page 3)
For installation and assembly you will require the following tools:
Measuring ruler (4)
Centre punch (5)
Hammer (6)
Drill bit set (7)
Drill (8)
Screwdriver (9)
24
All manuals and user guides at all-guides.com
Description
Switches the monitor on and off.
Reduces the value of the selected parameter.
Increases the value of the selected parameter.
Calls up the parameters to be set in the
following order:
– Brightness („BRT")
– Colour („COL")
– Contrast („CON")
– "TINT" function
Not used in PAL format
– Picture format 16 : 9 or 4 : 3
Switches from video source 1 to video source 2
(V1 and V2) and vice-versa.
Receiver window for for IR remote control
PerfectView M70L