Principle Of Operation; Main Components Identification; Specifications - Greenlee FG01 G-Serie Manuel D'instructions

Principle of Operation

The FG01 G-Series Smart Pull calculates pulling force
by measuring the tension of the rope. The accuracy of
this method is ±2% speed and distance (See table for
he accuracy of the force reading).
The two outer rollers guide the rope into and out of the
device. The profile of the three inner rollers provides
14 degrees of deflection. This controlled deflection in
the rope path transfers 1/4 of the pulling tension to the
center roller.
The tension on the rope is measured at the center
roller. That roller rides on a compression load cell. As
it is depressed, there is an electronic signal sent to the
display unit, where it is converted to a force to be dis-
played and recorded in either lbs or kg.

Main Components Identification

Specifications

Capacity ..........................................................................................4536 kg (10,000 lb)
Weight .........................................................................................................16 kg (35 lb)
Maximum Rope Size .................................................................................22 mm (7/8")
Greenlee Tools, Inc.
Battery
Terminal
FG01 G-Series Smart Pull
The pulling app connects to the device via Bluetooth.
It allows for real-time monitoring of the pull. It can alert
users if the pull force is approaching a pre-determined
threshold. It also allows for seamless documentation,
transferring the data from the unit to the app wirelessly.
From there it can be emailed or posted on social media.
It displays each saved pull in an easy-to-read and easy-
to-understand graph along with the preserved raw data.
The device is battery powered, using Makita 18 V
batteries.
FG01 Load Range (lbs)
0-1,399
1,400-2,749
2,750-5,599
5,600-10,000
Removable
Rollers
Locking Pin
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Makita is a registered trademark of the Makita Corporation.
4
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Tolerance (lbs)
+/- 75
+/- 95
+/- 140
+/- 235
Cam