Siemens TE809 Serie Mode D'emploi page 17

Brightness
The display 5 brightness
1 to 10
Water hard
.
●
required setting.
●
gramme should be run. The factory setting
Level Wate
German (°d
local water supplier.
● Dip the test strip briel y in water and
check the result after one minute.
1 1-7
Water filter 8-14
15-21
A new water i lter
it can be used.
● To do this, press the water i lter
press the start
Place 1 l co
●
Place suction pipe in container ▶ start
● Place a container with a capacity of 1 litre
●
the container.
●
l ow through the i lter
● Next, empty the container.
TE809_1RW
All manuals and user guides at all-guides.com
1, 2, 3 or 4
.
4
.
1-13
14-25
39-54
start
i rmly
button 8
. Fill the water tank
" mark.
.
.
. Water will now
to rinse it.
The appliance is ready for use again.
Info:
Rinsing the i lter
activates the setting for the "change i lter"
display.
Servic
You can i nd detailed information about the
water i lter in the enclosed i lter instructions.
The i lter
the latest after two months. It needs to be
damage the appliance).
filter settin no
Replacement i lters can be obtained from
retailers (TZ70003) or from customer
service (575491).
If no new i lter
.
and
you are on vacation), the existing i lter
used again. To do this, simply dispense a
cup of hot water.
en
disp
Wa
13
08