Safety Information - frieling 2SV Mode D'emploi Original

6.1 Safety information

WARNING
Please observe the following safety notices, before cleaning the unit to avoid
damage to the unit or personal injury:
To ensure optimum performance, the unit must be cleaned regularly. Failure to clean
the unit regularly can lead to potential malfunctions, as well as safety and health risks.
Always unplug the unit prior to cleaning.
Wait a few minutes to clean after using, as the sealing bar remains hot after use. Wait
until the strip has cooled before cleaning.
Clean the unit after every use as soon as it has cooled. Leaving the unit uncleaned for
long periods can make it very difficult to remove leftover food and grime and may even
damage the unit.
If moisture penetrates the unit s housing, it can damage the electronic components.
Ensure that no moisture enters the device.
Do not use harsh or abrasive cleaning agents.
Do not attempt to scrape off stubborn grime with hard or abrasive tools.
Dry all parts thoroughly before using after cleaning.
Do not immerse the unit in water or other liquids.
6.2 Cleaning
Outside of the unit
Wipe with a damp cloth or sponge and mild dish soap.
Inside of the unit
Wipe away any food or liquids with a paper towel.
Cleaning bags for reuse
Wash the bags in warm water with mild dishwashing soap, then rinse them well and allow
them to dry completely before reusing
WARNING
Bags used to store raw meat, fish or greasy foods should never be reused due to risk
of contamination.
Sealing profile (presses the bag against the sealing bar)
Remove the sealing profile and clean it in warm soapy water.
Please note
The sealing profile should be cleaned thoroughly before installing it again.
.
15