Cleaning And Maintenance - Dometic WAECO CoolMatic HDC-190 Notice D'emploi

HDC-190, HDC-220
➤ Remove the profile (6 8, page 5).
➤ Unscrew the top hinge (6 6, page 5).
➤ Take hinge AA out of the spare parts bag included in delivery and attach
to the top side of (6 6, page 5).
➤ Attach the profile (6 8, page 5) and the pins (6 7, page 5) again.
➤ Also attach the pins from the spare parts bag.
➤ Attach the top bolt in hinge AA.
➤ Insert the socket for the bolts (two per door) in the holes intended for this
on the left side (the sockets including the locking mechanism are in the
spare parts bag).
➤ Put the top door back in place.
➤ Attach the middle hinge (6 5, page 5) to the left side.
➤ Cover the top hinge AA with the covers from the spare parts bag.
➤ Put the bottom door back in place.
➤ Insert the bottom hinge (6 1, page 5) and the bolt on the left side.
7

Cleaning and maintenance

Caution!
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the refrigerator.
Caution!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
➤ As soon as the refrigerator becomes dirty, clean it with a damp cloth.
➤ Make sure that no water drips into the sealing. This can damage the
electronics.
➤ Wipe the refrigerator dry with a cloth after cleaning.
8 Guarantee
Our general guarantee conditions apply. If the product is defective, please
send it back to the WAECO branch in your country (addresses on the back of
the instruction manual) or to your specialist dealer. For repair and guarantee
processing, the following documents must be sent along with the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
All manuals and user guides at all-guides.com
Cleaning and maintenance
29