Dreame V10 Manuel D'utilisation page 9

Care & Maintenance
Cleaning the Soft Roller Nozzle and Mini-Motorized Nozzle
Note: To prevent injury from accidentally turning on the vacuum, make sure the Soft Roller
Nozzle or Mini-Motorized Nozzle is detached from the vacuum before removing the head.
The Mini-Motorized Nozzle and Soft Roller Nozzle contain electrical components, and the
Soft Roller Nozzle head also contains bearings. Do not wash these parts with water. Be
careful of sharp objects when removing debris caught in the heads of Soft Roller Nozzle
and Mini-Motorized Nozzle.
Cleaning the Soft Roller Nozzle
1. Push the brushbar head release button in the direction of the arrow until the cover of the
brushbar head pops to open, then remove the brushbar head by lifting it in the direction
indicated.
2. After you have finished cleaning the Soft Roller Nozzle , reinstall it by following the
disassembly steps in reverse.
13
Care & Maintenance
Cleaning the Mini-Motorized Nozzle
1. Use a coin as illustrated to rotate the
lock counterclockwise until you hear a
click.
3. Stand the brush head upright in a
well-ventilated area for at least 24 hours
until it is fully dry.
12
11 1
10
24 hrs
9
8
7 5
6
2. After unlocking the brush head, remove
it from the Mini-Motorized Nozzle , then
rinse and clean the brush head.
4. Once the Mini-Motorized Nozzle is dry,
reinstall it by following the disassembly
steps in reverse.
2
3
4
14