Manually Initiating The Reconditioning Process; Troubleshooting - Motorola IMPRES WPLN4111 Mode D'emploi

Manually Initiating the Reconditioning Process

Within 2-1/2 minutes of the initial insertion of an IMPRES battery
(STEADY RED indication), remove and reinsert the battery within 5
seconds to manually force reconditioning to occur. The charger
indicator changes from a STEADY RED to a STEADY YELLOW. This
forces the charger to recondition and automatically recharge the
battery. This is a useful feature to have when IMPRES batteries have
been in storage for several months or longer. Two or three manual
recondition cycles may be required to rejuvenate the batteries, due to
long term storage conditions.

TROUBLESHOOTING

When troubleshooting, always observe the color of the LED.
Problem
No charger 1a. Charger contact is not
indication
1b. No power to the charger.
Flashing Red 2a. Charger contact is not
Indication
2b. Battery is not chargeable.
Table 2. Troubleshooting
What it means...
being made.
being made.
What to do...
1a. Check that the radio with battery,
or the battery alone, is inserted
correctly.
1b. • Make sure that the power cord
is securely plugged into the
charger and an appropriate AC
outlet, and that there is power
to the outlet.
• Replace fuse.
2a. • Remove the battery from the
charger and replace it back into
the charger.
• Verify that the battery is a
Motorola-authorized battery
listed in Tables 4 through 8.
Other batteries may not
charge.
• Remove power from the
battery charger and, using a
clean dry cloth, clean the gold
metal charging contacts of
both the battery and the
charger.
2b. Replace battery.
7