Operational Safety Guidelines - Motorola IMPRES WPLN4111 Mode D'emploi

WARNINGS (continued)
6. Do not disassemble the charger – it is not repairable
!
and replacement parts are not available. Disassembly
of the charger may result in risk of electric shock or fire.
WARNING
7. To reduce risk of electric shock, unplug the charger from the
ac outlet before attempting any maintenance or cleaning.
8. For fuse replacement, use only fuses of the same type and rating
listed on the charger label. Replace fuse with Cooper-Bussman
GDC-3.15 or approved equivalent only. The following parts can be
ordered from Motorola Radio Products and Services Division (1-
800-422-4210 [US and Canada] or 1-847-538-8023 [International]):

OPERATIONAL SAFETY GUIDELINES

• Turn the radio off when charging the battery.
• This equipment is not suitable for outdoor use. Use only in dry
locations/conditions.
• Connect equipment only to an appropriately fused and wired supply
of the correct voltage (as specified on the product).
• Disconnect from line voltage by removing the main plug from the out-
let.
• The socket outlet to which this equipment is connected should be
close and easily accessible.
• For equipment using fuses, replacements must comply with the type
and rating specified in the equipment instructions.
• Maximum ambient temperature around the charger must not exceed
40°C (104°F).
• Make sure the cord is located where it will not be stepped on, tripped
over, or subjected to water, damage, or stress.
Fuse 6587577G01
3