Canon WG7000 Serie Démarrage page 36

Network Connection
Connecting to a Network with a Fixed IP Address
Step 3 Set a fixed IP address
EN
Setting an IPv4 address
An IPv4 address can be set with "Auto Acquire" to assign an address automatically using DHCP, or with "Manually
Acquire" allowing you to enter information yourself. To set a fixed IP address, use "Manually Acquire".
• When setting a fixed IP address, an "IP address", "subnet mask", and "gateway address" are required.
Depending on your network configuration, information other than an IP address, subnet mask, and
gateway address may be required. Contact the network administrator for required information.
• To set an IPv6 address, refer to the online manual.
1
In the Home screen, press <Menu>.
2
Select <Preferences>
• When the login screen is displayed, enter the system
manager ID and security code.
• Contact the network administrator for the system
manager ID and security code (set to "7654321" by
default).
3
Select <TCP/IP Settings>
Address Settings>.
34
<Network>.
<IPv4 Settings> <IP