Canon WG7000 Serie Démarrage page 23

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Printing Results Are Not
Satisfactory
Check first
Did you check the paper and print quality?
Check that settings in the machine's operation
panel or in the printer driver match the paper size,
type, and print quality that you want to use.
P.18 "Loading Paper in the Paper Drawer"
P.16 "Printing"
If settings match, increase the "resolution" print
quality settings and print again. Increasing the
"resolution" print quality settings in the machine's
operation panel or the printer driver might
improve print results.
NOTE
Depending on the settings for <2-sided printing>,
<Density/Drying Time Adjustment>, and <Ink
Saving>, colors may be light.
Printouts Are Faded/Colors Turn Out
Differently/White Streaks (Lines)
Appear
Check 1
Did you check for clogging in the print head?
Print out a nozzle check pattern, and then
perform print head cleaning, etc. as necessary.
P.22 "Printing/Checking a Nozzle Check
Pattern"
Check 2
Did you perform color correction (All Paper
Types)?
Perform color correction (All Paper Types).
P.23 "Performing Color Correction (All Paper
Types)"
Check 3
If the procedures above did not resolve the
problem, perform color correction (Single Paper
Type).
P.23 "Performing Color Correction (Single
Paper Type)"
For details
"Maintenance" and "Frequently Asked Questions" in the Online Manual
Color Unevenness or Colored Streaks
Check 1
Did you check the condition of the print
head?
Perform a print head diagnosis.
P.24 "Performing a Print Head Diagnosis"
Check 2
If the procedures above did not resolve the
problem, perform color correction (Single Paper
Type).
P.23 "Performing Color Correction (Single
Paper Type)"
Colors Are Misaligned
Check 1
Did you perform print head position
adjustment?
Adjust the position of the print head to correct
misaligned colors, etc.
P.24 "Aligning the Print Head"
Copy Results Are Not Satisfactory
Check 1
Is the original placed on the platen glass
correctly?
Place the original with the side to be scanned
down.
P.16 "Placing Originals"
Check 2
Are you copying an original that was printed
out on the machine?
If copying an original that was printed out on the
machine, printing may not turn out well
depending on the original photo or document.
Print directly from the machine, or directly from a
PC where printing from a PC is possible.
EN
21

Publicité

Table des Matières
loading

Table des Matières